Dover com problems

greenspun.com : LUSENET : Elevator Problem Discussion : One Thread

I have a duplex dover dmc that if i connect the door, selector and group link in the fast tool has no responce but if I unplug any of them the tool comes back on line.

-- kevin mccreadie (kmccreadie@ozemail.com.au), December 21, 2003

Answers

It sounds like your 12 VDC from the power supply may be too low. (Should be 10.5 volts or higher) Does it do the same thing from either car? Also check the 24 VDC supply from the pump unit. Pin 2 on the RS232 plug has 24 volts on it. MIke

-- Michael Sutton (msutton1@midsouth.rr.com), December 24, 2003.

REPLY TO DOVER COM PROBLEMS

TRIED ALL THAT IT STILL DOES WORK FOR MORE THAN 30 SECONDS

-- kevin mccreadie (kmccreadie@ozemail.com.au), January 03, 2004.

hey what did you find here kevin?

-- joe (whobwho@yahoo.com), October 04, 2004.

Moderation questions? read the FAQ