change 6 volt to12 volt on 47 case with Magnetogreenspun.com : LUSENET : Countryside : One Thread |
I have a 47 Case DC . I was told that all I need to do is change my battery , generator and lights to 12 volt . Is this true ? If not what else needs to be done .
-- Kerry Rebiger (kerry@ticon.net), April 14, 2002
The starter will get a bit more stress, but it will not be 'on' as long, so it will handle 12v just fine. There are some generators/alternators that are easier to use than others. You have the basics right, yes.All this is well covered if you want more info, parts sources, at a discussion web site like this one: www.ytmag.com
Good luck, --->Paul
-- paul (ramblerplm@hotmail.com), April 14, 2002.
Also should change the coil and down the road you will want to put on a new condensor.
-- Polly in NNY (jserg45@hotmail.com), April 14, 2002.
But you wont really need to change the coil and condensor because you have a magneto!
-- john hill (john@cnd.co.nz), April 14, 2002.
You can go to a good Auto Electric Dealer and get a 8 volt battery and that is all you will need to change except you need to ground the field on the generator which will bypass the voltage regulator.
-- Mel Kelly (melkelly@webtv.net), April 15, 2002.