TMAX 100 exposed at 400greenspun.com : LUSENET : B&W Photo - Film & Processing : One Thread |
Hi GuysI accidently used a T-max 100 film while the camera was still set to 400. I use D-76 develloper. Is there a way to rescue the shots when developping the film?
Thanks in advance
Reinier
-- ReinierV (rvlaam@xs4all.nl), January 19, 2002
Reinier, this is only a two-stop B&W push, so you should be able to save the images, even though you will lose shadow detail. To process T-Max 100 at 400, Kodak recommends 12 minutes at 68 degrees in T-MAX developer, or 9 minutes at 75 degrees. Anchell and Troop give 11 minutes at 68 degrees in D-76 or ID-11; 9 minutes in full-strength XTOL; 12.5 minutes in XTOL 1:1; 9.5 minutes in HC110 dilution B.The extra development will increase the contrast, so you may need to print softer.
Best Wishes,
-- Bob Fleischman (RFXMAIL@prodigy.net), January 19, 2002.