Otis 211 won't reset with an esb1

greenspun.com : LUSENET : Elevator Problem Discussion : One Thread

I read the readout and it said run 12,464 1ESB. I did the s2, s3 reset but the elevator stays open on bottom floor. It will not run on inspection and the stop switch is not off. The gdglstat light is lit and my tech info says that means the safety chain is made up. Mnor is lit saying it's on normal operation. The power and bat lights are green and the hrt is blinking red. The ring is also blinking red with rsl blinking green. Dz is lit and the doors will reopen if I pull them closed. upready and dnready lights are lit. Can anyone help please?

-- george (servicetechs@yahoo.com), September 24, 2001

Answers

open the cop.top corner red wires plug usually comes loose.plug it backin then tywrap problem solved.... regards dan

-- dan w (danotis@aol.com), March 04, 2003.

Moderation questions? read the FAQ