welding of stainless steelgreenspun.com : LUSENET : Resistance Welding : One Thread |
what about welding of austenitic stainless steel
-- orhan baylan (orbaylan@turk.net), May 08, 2001
One (1) of the best sources of weld schedule information is found in the “Resistance Welding Manual” published by the RWMA. Austenitic stainless steel may require the water cooling affect on the electrodes to be used to quench the weld zone faster to reduce carbon precipitation.General Rule of Thumb:
Stainless Steel Do not use less than 5 cycles if possible. 2 to 3 times pressure. 10 – 15% less current.
If we may be of any further service, please feel to contact us direct. Good luck on your project.
Bob Balla T. J. Snow Company, Inc. 6207 Provence Street Chattanooga, TN 37421
Phone: 423-894-6234 423-308-3161 (direct line) Fax: 423-892-3889 e-mail: bobballa@tjsnow.com
-- Bob Balla (bobballa@tjsnow.com), May 08, 2001.