will #5 shutter work with wisner

greenspun.com : LUSENET : Large format photography : One Thread

Does anyone here use a 250mm wide field ektar with a wisner 8x10? i was looking at their website and they only sell lensboards for 0,1,3 size shutters. i have a kodak 2d but I'm thinking of upgrading to the wisner traditional for some front tilt and an all around nicer camera. Any help would be appreciated. thanks,daniel mcclenaghan

-- daniel mcclenaghan (danielmc@fda.net), December 14, 1999

Answers

Why don't you call Ron Wisner at (800) 848-0448 . I would think he would know the answer

-- steve Rosen (stevenjrosen@yahoo.com), December 14, 1999.

Yes, according to information on thier site, the boards are 5 1/4" square. This is ample for a No. 5 Ilex, I presume all no. 5's are the same dimensions. Presumably they don't list boards larger than a No. 3 because of the limited demand. There is no big trick, if you are reasonably handy with tools, to drilling your own holes in a blank board, I am sure they supply blank boards. Ask around and you may have an aquaintance that is capable of drilling the holes, or even constructing the boards. I have done both with great success and am by no means a "craftsman".

-- Marv (mthompson@clinton.net), December 14, 1999.

Daniel,

I use a Kodak 10" WF Ektar on that Wisner board with no problem. It's a big shutter and lens, but the camera can handle it with no problem.

Instead of the usual lens/shutter attachment method, common with more modern shutters, like the Copals, this lens uses a threaded flange/ring, with a lip that is screwed directly onto the front of the lens board with small wood screws. The lens/shutter combination is then mounted by threading it directly onto this flange/ring which has already been permanently attached to your lensboard.

When you get the lens, measure the outside diameter of the mounting flange/ring and have your board drilled to that size. The hole will not have to be rabbeted around the perimeter of the opening on the inside surface of the board to accomodate the usual Copal-type mounting ring.

I hesitate to give you the hole dimension for my particular lens/shutter since yours might be different. The hole size will not correspond to the usual Copal 0, 1, 3 dimensions. And unless you have another lens that attaches in the same fashion, into a similarly sized hole, the lensboard will not be usable for any other lenses once drilled for the 10" WF Ektar.

It's a great lens for 8x10. Good luck, Sergio.

-- Sergio Ortega (s.ortega@worldnet.att.net), December 15, 1999.


Moderation questions? read the FAQ