missed exposure

greenspun.com : LUSENET : Large format photography : One Thread

I shot a seen accidently with 400 film at 100 asa; 2 stops overexposed. There was a range of 3.5 stops in the scene. The scene was dark with only a few highlights. Before I develop this sheet, what can I do to get the best neg considering the circumstances? Thanks for all replies, chet

-- Chet Wright (chetwr@zianet.com), March 29, 1999

Answers

I would say underdevelop (n-1 or n-2) and you will probably get a decent neg. Your highlights are going to be what the development will affect. Development really won't do anything to your shadows but you'll probably have really nice detail in them and they can always be printed down. Good luck!

-- Brian Jefferis (jefferis@erols.com), March 29, 1999.

Sorry, I have to correct myself. Development will affect your shadows but they are generally fully developed in the first few minutes so use development time to control your highlights.

-- Brian Jefferis (jefferis@erols.com), March 29, 1999.

With the fairly flat scene you describe, you have actually exposed pretty close. You have plenty of exposure in the shadows, so there ought to be good detail. A normal development ought to bring up the highlights without blocking them. If you find you want the highlights a bit brighter, a contrastier paper grade should handle it with no problem. If you are really worried, you can cut the development by a minute or so, to limit how heavy the highlights go, without compromising the shadows. Keep some notes, and you are already on the way to using the zone system.

-- Tony Brent (ajbrent@mich.com), March 29, 1999.

You got lucky! When shooting scenes with a high brightness range, my standard technique (for roll film anyway) is to overexpose 2 stops and pull my development about 30%. This gives a nice flat negative with plenty of shadow detail and very printable highlights. If you want more contrast you can always get it in printing.

-- Peter Hughes (leonine@redshift.com), March 30, 1999.

Moderation questions? read the FAQ