If you don't have access to the EPS any longer its a little more difficult for comparisons sake. However the K2500/K2000 can easily duplicate the orginal sound of the EPS and more likely make it better than the orignal. Often when you load in an Ensoniq sound, you get more layers than the patch actually uses. Ensoniq would have additional layers that were only active when you used the Patch Select buttons. So more than likely, not all of those layers are being used. After you load in the EPS disk, press EDIT. Press the Setup button, this will mute all layers except the one you are currently looking at. You can use the CHAN/Bank buttons to scroll through the layers, to find out which ones you really want to use. Delete the layers that you don't want. After than, its simply a matter of programming the envelopes and filter settings you want. Another method is to start with an existing Kurzweil program that is similar and simply change the KEYMAP to one that you loaded in. That way most of the work is done for you!!(posted 9341 days ago)Thanks for visting the K2500 Zone forum. Mike Martin