[ Post New Message | Post Reply to this One | Send Private Email to Mike Martin | Help ]

Response to Using Digital(AES)outs

from Mike Martin (k25zone@aol.com)
To use the AES/EBU digital outs do the following. Go to the sampling page. Set the sample INPUT to DIGITAL. Choose Coaxial for cable and AES/EBU for Format.

Now, set the sampling INPUT to ANALOG. Set the SRC: to INT Set your desired sampling rate. ...Thats it.

To tell the K2500 which digital format you want to use, you must first set that information on the sampling page while its set to digital. Then when you set it back to analog, you can set the sampling rate and the source.

I hope this helps. Thanks for visiting the K2500 Zone and Forum

Mike Martin

(posted 9348 days ago)

[ Previous | Next ]